SpaceGuard Products 

Just when you thought it couldn't get any easier to install your welded wire partition line... SpaceGuard Products has redesigned the 2180 welded wire system so that it is easier to install and more secure than ever before. 

We are pleased to introduce our new face mount bracket (pictured below) to hang all slide door tracks in the 2180 welded wire line.  This single piece component replaces the welded holder (part# TF2211HANGER), adding strength to the system, reducing cost from the product, and taking time out of the installation. 

Equally as important, the 2180 line now uses the same 2-wheel bearing trolley used in our FordLogan and SG2000 wire enclosure lines.  This change eliminates the previous movement found in the 4-wheel trolley and when combined with the re-engineered door guide, correct installation makes our slide doors impossible to "lift" out of the track.

------------------------------------------------------------------------------------

Finishes and Colors

*Unless otherwise specified WireCrafters products receive one coat of gray enamel.

Colors
Wire Crafters maintains stock of the optional colors shown. Orders specifying these or match colors require an additional charge.  Wire Crafters will apply two coats of the optional color, or one coat of gray and one coat of color. Touch up paint is provided with all orders.
Custom match colors are available. Users should submit a paint chip at least one inch square in size with their order or specify RAL color number.   Please contact customer service for additional information.

PLEASE NOTE:
The colors displayed on this website are to show users what optional colors are kept in stock. Users should not place orders based on the colors reproduced on their computer screens as they may vary from the actual color. Please request a WireCrafters color chart before ordering a color selection.

Optional Finishes

Cogan Perimeter Guards
Cogan Perimeter Guards protect your equipment and inventory from warehouse traffic. Available in a multitude of configurations, our modular perimeter guards are engineered to help you set up a protected area quickly and easily.
Specifications 10 gauge 2" x 2" square wire mesh panels Simple nut and bolt connections Durable powder-coated paint: Black panels and safety yellow posts Posts are 2" x 2" with safety-yellow finish Optional swing door 3’W x 5’H with padlock
WIRE MESH PERIMETER GUARDS 5' H Panels CAT#   Width PG51 1' PG52 2' PG53 3' PG54 4' PG55 5' PG56 6' PG57 7' PG58 8' PG59 9' PG510 10' CAT# LPG Line Post CPG Corner Post SW35 Swing Door (3' wide)

Call 864-235-6888 for information and discount pricing

Cogan Stock Size Cages

STOCK SIZES (custom sizes available)             Corner Installation Installation Along Existing Wall Self-Enclosed Wall SIZE (ft.) W x D x H 2 SIDES CAT # 3 SIDES CAT # 4 SIDES CAT # ROOM WITHOUT ROOF 10 x 10 x 8' 210108 310108 410108 20 x 10 x 8' 220108 320108 420108 20 x 15 x 8' 220158 320158 420158 30 x 20 x 8' 230208 330208 430208 20 x 20 x 10' 2202010 3202010 4202010 ROOM WITH ROOF 10 x 10 x 8' R210108 R310108 R410108 20 x 10 x 8' R220108 R320108 R420108 20 x 20 x 8' R220208 R320208 R420208 30 x 20 x 8' R230208 R330208 R430208 10 x 10 x 10' R2101010 R3101010 R4101010 20 x 15 x 10' R2201510 R3201510 R4201510 20 x 20 x 10' R2202010 R3202010 R4202010

Over 100 years of experience goes into every product Cogan makes, so when we guarantee the structural integrity of our products for life, it really means something. We've been here since 1901 and we're here to stay

Call 864-235-6888 for Pricing

Style 840 Woven Wire Physical Barriers

Wire Partitions from WireCrafters are a simple, effective way to protect personnel from the dangers posed by automated equipment. These barriers are a strong, reliable, and economical solution to plant safety needs. System versatility allows easy integration of access doors or material handling openings with system controls.  Unlike hi-tech devices, this guard is always on duty, unaffected by power outages or electrical problems.  Also doubles as a potential safety net by containing objects ejected by a malfunctioning robot.  Crimped and woven wire mesh is resilient; resists dings, retains its shape, and looks better longer.

Interlocks
WireCrafters can supply your barrier with Fortress® electrical  interlocks or mounting plates for your own control system.  Please specify your preference when placing your order.  See details and offerings on our Electrical Interlocks page.

Style 840 Woven Wire Physical Barrier MATERIAL SPECIFICATIONS

PANELS - Shall be 10gauge steel wire crimped and woven in to 2" x 1" opening rectangular mesh, securely welded into a frame of 1-1/4" x 1-1/4" x 1/8" steel angle factory punched with 7/8" x 7/16" slotted holes to accept 3/8" mounting hardware. Panels four to six feet wide shall have one 1/4" x 3/4" flat stiffener, wider panels receive two 1/4" x 3/4" stiffeners. All panels shall be fastened to posts with 3/8" x 3" plated bolts and nuts.

DOORS - Hinged shall be constructed of the same materials as the panels with two 1/4" x 3/4" horizontal stiffeners across the width, and two diagonal 1/4" x 3/4" stiffeners from center to the corner. Hinged doors shall be equipped with padlock lugs (cylinder lock optional), three 4" x 4" spun pin hinges, and pick plate/slam bar assembly.

DOORS - Sliding shall be constructed of the same materials as the panels with two 1/4" x 3/4" horizontal stiffeners across the width, and two vertical 1/4" x 3/4" stiffeners from center to top or bottom. Sliding doors shall be equipped with two 4 wheel trolley trucks, 1-7/8" x 2-3/8" door track, pad lock lugs (cylinder lock optional), and door keeper assembly.

POSTS - Shall be made of 2" x 2" x 14 gauge steel tubing. Base plates of 2" x 7" x 1/4" steel flat with two 7/16" round holes for anchoring, shall be welded to each tube. Posts are factory drilled with 1/2" holes to accept hardware for mounting panels.

HARDWARE - Shall be 3/8" standard thread grade two plated nuts and bolts. Floor anchors are 3/8" wedge type-provided.

FINISH - Non-plated parts receive one coat of gray acrylic enamel. Touch up paint included with each shipment.

• Twenty standard sized panels; 4' 0" or 5' 0" high by 1' 0" to 10' 0" wide.
• Panels install horizontally between posts.
• Barrier may be built to any height, use single panel or stacking multiple panels.
• Welding curtain sized to fit panels are available.
• Hinged, double hinged, sliding, and vertical rise gates available.
• Simple bolt up assembly, easy to remove for maintenance access.
• Lift out panel openings available.
• Automotive standard barrier available.
• Custom sizes, heavy duty options available.
• Electrical interlock available per your specification.
• Panels may be ordered with any mesh, expanded metal, sheet metal, or clear Lexan.

• Panels & Posts
• Doors
• Options
  • Electrical Interlock
  • Weld Curtains
  • Special Mesh
  • Finishes & Colors

Folding Guard Corporation Increases Capacity and Quality by Moving to Bigger Facility.

Bedford Park (January, 2007) — Folding Guard Corporation, a leading provider of welded and woven wire security, safety and loss prevention products, has recently moved its operations and manufacturing plant from Chicago's Pilsen neighborhood to Bedford Park, IL. Folding Guard's new location is situated in an industrial development just 10 miles southwest of Chicago's downtown Loop.

“In order to better serve the growing needs of our customers and streamline our processes, it was imperative to find larger facilities on a single floor,” stated Doug Wynne, President of Folding Guard Corporation. The new facility nearly doubles the previous space, totaling 168,000 square-feet. Folding Guard hired an engineering consultant familiar with the machinery and processes used to manufacture their products, to design the new plant layout with the purpose of increasing workflow and efficiency. The single floor facility provides seamless manufacturing from raw material to finished goods. Manufacturing, paint, packaging, shipping and office support are now on one floor and the result has been a 50 percent increase in capacity and efficiency.

Folding Guard has added two new mesh welders and four new pick-and-place robots to the manufacturing plant, and will have a new powder coating system operational by February 2007. “By bringing the powder coating in-house, we now have total control of the entire manufacturing process, and that means even greater quality and reliability,” stated Mr. Wynne. “We want to offer our customers the highest quality finishes available.”

The relocation required meticulous planning to ensure no break in service to customers and no loss of productivity. Planning and implementation took 6 months, including inventory build-up, teardown of each product line, assembly of equipment in the new plant, and lastly, moving all personnel.

A Green Success Story: Folding Guard's new Powder Coating System provides a better product at the same price — and it's good for the environment.

Bedford Park, Illinois, May 2007 — For more than forty years, Folding Guard had been using a “dip coating” method to paint its products. Individual parts were dipped into wet paint and then required prolonged drying time. The wet paint required frequent clean-ups and color options were limited.

Folding Guard recently built a new, state-of-the-art manufacturing facility and rather than installing the same kind of dip coating systems used in the past, Folding Guard chose to build a technologically advanced powder coating system. In this new, more sophisticated method of painting products, dry powder paint pigments are electrostatically charged and sprayed onto individual parts. The parts are then placed in an oven and the powder particles melt and coalesce to form a continuous film.

Powder coating produces a smooth, hard, chemical-resistant finish that won't chip or peel. As a result, customers get a product with a longer life-span — that's virtually maintenance free, and looks better. And the color choices with powder coating are virtually limitless. Folding Guard offers standard and specialty colors, and can match corporate colors as well. Today Folding Guard leads the industry in quality and durability of product finish.

The price for powder coated Folding Guard products remains the same as dip coated products. You get the same price with a superior, durable finish and more color options — without delay in delivery or lead time. And a process that was potentially harmful to the environment has been replaced by one that's environmentally friendly.

Standard Finishes

The standard maintenance-free finish is galvanized steel on our welded wire products (shown left); and machine grey powder coating on both our Wov-N-Wire™ (shown center) and expanded metal products (shown right.)


Standard Powder Coating Colors

All products can be ordered with a durable standard powder coating finish without delay in delivery or lead time. Folding Guard can also match any specific corporate color. Color chips shown are approximate.

A Green Success Story: Folding Guard's new Powder Coating System provides a better product at the same price — and it's good for the environment.

Bedford Park, Illinois, May 2007 — For more than forty years, Folding Guard had been using a “dip coating” method to paint its products. Individual parts were dipped into wet paint and then required prolonged drying time. The wet paint required frequent clean-ups and color options were limited.

Folding Guard recently built a new, state-of-the-art manufacturing facility and rather than installing the same kind of dip coating systems used in the past, Folding Guard chose to build a technologically advanced powder coating system. In this new, more sophisticated method of painting products, dry powder paint pigments are electrostatically charged and sprayed onto individual parts. The parts are then placed in an oven and the powder particles melt and coalesce to form a continuous film.

Powder coating produces a smooth, hard, chemical-resistant finish that won't chip or peel. As a result, customers get a product with a longer life-span — that's virtually maintenance free, and looks better. And the color choices with powder coating are virtually limitless. Folding Guard offers standard and specialty colors, and can match corporate colors as well. Today Folding Guard leads the industry in quality and durability of product finish.

The price for powder coated Folding Guard products remains the same as dip coated products. You get the same price with a superior, durable finish and more color options — without delay in delivery or lead time. And a process that was potentially harmful to the environment has been replaced by one that's environmentally friendly.